Motul 8100 X-CLEAN EFE 5W30 100% Synthetic Performance Engine Oil-5 Liter (Qty2)

Description

Motul 5W-30 8100 X-Clean EFE 5L Full Synthetic Ester Based Engine Motor Oil
(Qty 2 Jugs)
Part Number:
109471 (x2)
MOTUL 5W-30 8100 X-CLEAN EFE 100% SYNTHETIC - ESTER BASED ENGINE OIL
Gasoline & Diesel lubricant - EURO 4, 5 and 6
TYPE OF USE
Advanced 100% Synthetic lubricant that provides at the same time High Protection and Fuel Economy. Approved by BMW Group, GM (General Motors) Opel, Mercedes and VW for its Extra Fuel
Economy property. Specially designed for the latest generation cars, powered by Gasoline and Diesel engines, naturally aspirated or turbocharged, direct or indirect injection. For vehicles that are Euro 4, Euro 5 or Euro 6 emission regulation compliant and require an ACEA C3 engine oil i.e. high HTHS (> 3.5 mPa.s) viscosity and 'Mid SAPS' with reduced content of Sulfated Ash (= 0.8%), Phosphorus (0.07 = x = 0.09%) and Sulfur (= 0.3%), or an ACEA C2 engine oil i.e. a low friction, low HTHS (= 2.9 mPa.s) viscosity and 'Mid SAPS' oil with reduced content of Sulfated Ash (=0.8%), Phosphorus (= 0.09%) and Sulphur (= 0.3%). Suitable when a 'Fuel Economy' lubricant is required: ACEA C2 standard.
Compatible with catalytic converters (CAT) and Diesel Particulate Filters (DPF).
PERFORMANCES
STANDARDS: ACEA C2 / C3, API SERVICES SN
APPROVALS: BMW LL-04, GM-OPEL dexos2™ (replaces GM-LL-A-025 & B-025) under N° D20247HE011,MB-Approval 229.52,VW 505 01
PERFORMANCES: FIAT 9.55535-S1 / S3
RECOMMENDATIONS: HONDA, KIA / HYUNDAI, MITSUBISHI, NISSAN, SUBARU, SUZUKI, SSANGYONG, TOYOTA,…
Engines compliant with Euro 4, 5 and 6 emission regulations are fitted with sensitive exhaust gas after treatment systems. Indeed, Sulfur and Phosphorus inhibit catalytic converter operation leading to inefficient exhaust gas treatment. Also, Sulfated Ashes clog DPFs leading to shorten regenerating cycles, quick oil aging, higher fuel consumption and engine power loss.
The ACEA C3 standard requires from the lubricant significant oil film resistance and low emission performance during use in powerful engines. The ACEA C2 standard requires significant reduction of
friction to ensure gains in energy savings, and therefore fuel economy benefits.
MOTUL 8100 X-CLEAN EFE 5W-30 has synthetic base stocks coupled with specific friction modifier molecules and dedicated SAPS levels that generate outstanding oil film resistance, reduce friction in the engine and provide after treatment device compatibility. MOTUL 8100 X-CLEAN EFE 5W-30 brings high lubricating properties such as wear protection and high temperature resistance for better controlled oil consumption. ACEA C2 and C3 lubricants achieve extended drain intervals as managed by the vehicle on-board computer.